Double  Roll Crusher (Implementation standard MT/T 951-2005)
Since the domestic limestone type powerful XCMD  Double Roll Crusher was developed by Xinchuan, Xinchuan absorbed European  technology and kept innovating to produce new type of interchangeable teeth,  adjustable gap, etc. This crusher has the advantages of high rate of finished  product, good shape of finished product, large crushing capacity, long service  life, easy maintenance and so on. It can replace foreign powerful double roll  crusher. Our company has 6 patents of this crusher, which is a special  screening crusher for the production of calcined materials in vertical kiln and  rotary kiln in China. Meanwhile, our company is the equipment research unit of  Inner Mongolia Building Material Design and Research Institute for the research  and study of rock ore crushing process for calcium carbide.
This series of products is also suitable for  coarse, medium and fine crushing of brittle lumpy materials in coal, electric  power, environmental protection as well as chemical industries (materials with  compressive strength not exceeding 125-175MPa, such as raw coal, coal gangue,  coke, gypsum, talc, wollastonite, kaolin, granite, etc.).
Features  of XCMD Double Roll Crusher
 Patented  Phoenix tooth type
 Three-point  crushing method (cutting, stretching)
 Low  energy consumption and high throughput
 Quickly  replaceable wear parts tooth rollers
 For  the crushing of highly abrasive and viscous materials
 Product  size change by adjusting the gap between the crushing bar and the rollers
 Product  size change by adjusting the axis distance (secondary and tertiary crushers)
 Mechanical  coupling between gearbox and crushing rolls
 V-belt  connection between rolls and gearbox hydraulic coupling
 Rotation  and slip monitoring of the crushing rolls and hydraulic coupling
 Temperature  monitoring of bearings, gearboxes and hydraulics
 Raw  materials that can be processed with XCMD Double Toothed Roll Crusher include  limestone, clay, ore, gypsum, coal, coke, phosphate, marl, chalk, salt,  tailings and quicklime.
Â
(Coarse Crushing) Technical Reference Data
   Specification |
Roller diameter(mm) |
Roller   length(mm) |
Maximum feed   side length |
Size of   discharge(mm) |
Production |
Motor power |
Softlink weight |
Direct link weight(t) |
XCMD500 |
500 |
1000 |
≤350 |
≤100-200 |
75-150 |
37*2 |
11.5 |
10.2 |
1500 |
100-250 |
45*2 |
13.8 |
12.5 |
||||
2000 |
150-350 |
90*2 |
16.5 |
14.8 |
||||
2500 |
200-500 |
110*2 |
20 |
18.3 |
||||
XCMD650 |
650 |
1000 |
≤500 |
≤100-300 |
150-350 |
45*2 |
14.3 |
12.5 |
1500 |
200-450 |
55*2 |
20.5 |
18 |
||||
2000 |
250-550 |
75*2 |
25 |
23 |
||||
2500 |
300-650 |
90*2 |
31 |
27 |
||||
XCMD750 |
750 |
1000 |
≤600 |
≤100-300 |
150-350 |
45*2 |
25 |
23 |
1500 |
200-450 |
55*2 |
28.5 |
26.5 |
||||
2000 |
250-550 |
75*2 |
32 |
29.2 |
||||
2500 |
300-650 |
90*2 |
35.8 |
32.8 |
||||
XCMD850 |
850 |
1000 |
≤680 |
≤100-300 |
300-650 |
75*2 |
29 |
26.5 |
1500 |
400-1000 |
90*2 |
34.5 |
31.5 |
||||
2000 |
450-1200 |
110*2 |
39 |
36 |
||||
2500 |
500-1500 |
132*2 |
42 |
39 |
||||
XCMD1000 |
1000 |
1000 |
≤800 |
≤100-300 |
400-750 |
90*2 |
49.8 |
44 |
1500 |
500-1200 |
110*2 |
55 |
49.2 |
||||
2000 |
550-1500 |
132*2 |
61 |
55.5 |
||||
2500 |
650-1800 |
160*2 |
68 |
63 |
||||
XCMD1200 |
1200 |
1500 |
≤960 |
≤100-400 |
700-1500 |
160*2 |
84 |
76 |
2000 |
800-1800 |
185*2 |
96 |
88 |
||||
2500 |
1000-2500 |
220*2 |
109 |
101 |
||||
XCMD1500 |
1500 |
1500 |
≤1200 |
≤100-400 |
1000-2000 |
220*2 |
105 |
97 |
2000 |
1500-2500 |
285*2 |
119 |
111 |
||||
2500 |
2000-3000 |
355*2 |
135.5 |
128 |
||||
☆XCMD1800 |
1800 |
2000 |
≤1440 |
≤100-400 |
3000-5000 |
450*2 |
138 |
128 |
2500 |
5000-8000 |
520*2 |
168 |
158 |
||||
3500 |
8000-10000 |
600*2 |
233 |
221 |
(Medium Crushing) Technical Reference Data
Specification | Roller diameter(mm) |
Roller   length |
Maximum feed   side length |
Size of discharge |
Production |
Motor power |
Softlink weight |
Direct link weight |
XCMD500 |
500 |
1000 |
≤100 |
≤30-60 |
50-120 |
37*2 |
9.5 |
8.2 |
1500 |
100-180 |
45*2 |
11.8 |
10.5 |
||||
2000 |
150-220 |
90*2 |
14.5 |
12.8 |
||||
2500 |
200-300 |
110*2 |
18 |
16.3 |
||||
XCMD650 |
650 |
1000 |
≤120 |
≤30-60 |
50-130 |
45*2 |
12.3 |
10.5 |
1500 |
100-255 |
55*2 |
18.5 |
16 |
||||
2000 |
200-350 |
75*2 |
23 |
21 |
||||
2500 |
350-450 |
90*2 |
28 |
25 |
||||
XCMD750 |
750 |
1000 |
≤140 |
≤40-70 |
150-250 |
55*2 |
23 |
21 |
1500 |
200-350 |
75*2 |
26.5 |
24.5 |
||||
2000 |
250-450 |
90*2 |
30 |
27.2 |
||||
2500 |
350-550 |
110*2 |
33.8 |
30.8 |
||||
XCMD850 |
850 |
1000 |
≤160 |
≤40-70 |
150-300 |
75*2 |
26 |
23.5 |
1500 |
200-400 |
90*2 |
31.5 |
28.5 |
||||
2000 |
300-500 |
110*2 |
36 |
33 |
||||
2500 |
350-650 |
132*2 |
39 |
36 |
||||
XCMD1000 |
1000 |
1000 |
≤220 |
≤40-80 |
250-450 |
90*2 |
46.8 |
41 |
1500 |
350-550 |
110*2 |
52 |
46.2 |
||||
2000 |
500-700 |
132*2 |
58 |
52.5 |
||||
2500 |
650-800 |
160*2 |
65 |
60 |
||||
XCMD1200 |
1200 |
1500 |
≤250 |
≤40-90 |
650-900 |
160*2 |
81 |
73 |
2000 |
750-1100 |
185*2 |
93 |
85 |
||||
2500 |
900-1500 |
220*2 |
106 |
98 |
||||
XCMD1500 |
1500 |
1500 |
≤300 |
≤40-90 |
1000-1800 |
220*2 |
102 |
94 |
2000 |
1500-2200 |
285*2 |
116 |
108 |
||||
2500 |
2000-3000 |
355*2 |
132.5 |
125 |
||||
3500 |
3000-5000 |
420*2 |
185 |
177 |
(Fine Crushing) Technical Reference Data
Specification | Roller diameter |
Roller   length(mm) |
Maximum feed   side length |
Size of discharge |
Production |
Motor |
Softlink weight |
Direct link weight(t) |
XCMD500 |
500 |
1000 |
≤50 |
≤10-25 |
20-50 |
15*2 |
9.5 |
8.2 |
1500 |
30-60 |
18.5*2 |
11.8 |
10.5 |
||||
2000 |
40-70 |
22*2 |
14.5 |
12.8 |
||||
2500 |
50-80 |
30*2 |
18 |
16.3 |
||||
XCMD650 |
650 |
1000 |
≤60 |
≤10-25 |
30-80 |
45*2 |
12.3 |
10.5 |
1500 |
50-100 |
55*2 |
18.5 |
16 |
||||
2000 |
60-160 |
75*2 |
23 |
21 |
||||
2500 |
75-220 |
90*2 |
28 |
25 |
||||
XCMD750 |
750 |
1000 |
≤70 |
≤10-30 |
50-150 |
55*2 |
23 |
21 |
1500 |
80-180 |
75*2 |
26.5 |
24.5 |
||||
2000 |
100-200 |
90*2 |
30 |
27.2 |
||||
2500 |
120-250 |
110*2 |
33.8 |
30.8 |
||||
XCMD850 |
850 |
1000 |
≤75 |
≤10-30 |
100-220 |
75*2 |
26 |
23.5 |
1500 |
200-400 |
90*2 |
31.5 |
28.5 |
||||
2000 |
300-500 |
110*2 |
36 |
33 |
||||
2500 |
350-650 |
132*2 |
39 |
36 |
||||
XCMD1000 |
1000 |
1000 |
≤100 |
≤10-30 |
250-450 |
90*2 |
46.8 |
41 |
1500 |
350-550 |
110*2 |
52 |
46.2 |
||||
2000 |
500-700 |
132*2 |
58 |
52.5 |
||||
2500 |
650-800 |
160*2 |
65 |
60 |
||||
XCMD1200 |
1200 |
1500 |
≤120 |
≤10-30 |
350-900 |
160*2 |
81 |
73 |
2000 |
450-1000 |
185*2 |
93 |
85 |
||||
2500 |
600-1200 |
220*2 |
106 |
98 |
||||
XCMD1500 |
1500 |
1500 |
≤150 |
≤10-30 |
750-1200 |
220*2 |
102 |
94 |
2000 |
850-1500 |
285*2 |
116 |
108 |
||||
2500 |
1000-2000 |
355*2 |
132.5 |
125 |
||||
☆XCMD1800 |
1800 |
2000 |
≤150 |
≤10-30 |
1500-2500 |
385*2 |
155 |
135 |
2500 |
2500-4000 |
450*2 |
175 |
155 |
||||
3000 |
3500-6500 |
625*2 |
208 |
188 |
Remark
1.The  production capacity in the table is based on continuous uniform feeding of  medium hardness rocks whose materials do not contain clay, whose moisture  content is less than 5%, whose feed size is less than the maximum feed size  (the feed contains not less than 10% of the total feed size of the discharge  size), and whose loose density is 1.6t/m³ (stone density is 2.7t/m³).
2.The  parameters in the table are affected by different factors such as material  type, material nature, material hardness, raw material particle size, water and  mud content in raw material, feeding method, working environment of mine. The  production capacity of the equipment will produce large differences, and the  data in the table is for reference. Please contact us for specific  applications.
3.There are two  options of standard type and powerful type to choose.
4.The table with  ☆ number is recommended to use high voltage motor.
Â
http://www.benoeceps.com/